Qorvo PAC5556 Power Application Controller

Author : Qorvo Published Time : 2019-08-09
Qorvo PAC5556 Power Application Controller® integrates a flash-based high-performance MCU, Power Management, High-Side and Low-Side Gate Drivers, and Signal-Conditioning components in a single optimized System on Chip (SoC). Based on the Arm® Cortex®-M4F core, the PAC5556 is optimized for AC-Powered Brushless DC (BLDC) or Permanent Magnet Synchronous Motor (PMSM) control applications such as AC-powered fans, white goods, or compressors. Qorvo PAC5556 also includes optimized hardware support and software libraries for the IEC/UL 60730 Class B safety standard.

Features

Fully Programmable 32-bit MCUIntegrated 600V DC-DC N-Channel Buck ControllerIntegrated 600V Gate Drivers (250mA/500mA)Integrated PGA (3 Differential, 4 Single-ended)Integrated DACs and ComparatorsUART, SPI, I2C, and CAN Serial Interfaces

Applications

White goods, compressors, and pumpsAC-powered fans

Documents

PAC5556 Datasheet
Qorvo Newest

Qorvo QPF4288 Wi-Fi Front End Modules (FEM) are integrated FEMs that are designed for Wi-Fi 6 (802.11ax) systems. Now available at Mouser.

Date: 2019-09-04

Qorvo QPA3069EVB Evaluation Board develops the QPA3069 100W GaN Power Amplifier.

Date: 2019-08-28

Qorvo TGA2222 Evaluation Board develops the TGA2222 Wide Band Power Amplifier.

Date: 2019-08-28

Qorvo QPA1022EVB0 Evaluation Board is a demonstration and prototyping platform for the QPA1022 11GHz 4W Gallium Nitride (GaN) Power Amplifier.

Date: 2019-08-28

Qorvo QPA2210D and QPA2211D 7W GaN Ka-Band Power Amplifiers operate between 27Ghz and 31GHz to support satellite communications and 5G infrastructure.

Date: 2019-08-28

Qorvo TGA2222 Wide Band Power Amplifier MMIC covers 32GHz to 38GHz and provides 40dBm (10W) of saturated output power and 16dB of large-signal gain.

Date: 2019-08-28

Qorvo QPA2210DEVB01 and QPA2211DEVB03 Development Board evaluate QPA2210D and QPA2211D GaN Ka-Band Power Amplifiers.

Date: 2019-08-28

Qorvo QPA1022 11GHz 4W Gallium Nitride (GaN) Power Amplifier supports tight lattice spacing requirements for phased array radar applications.

Date: 2019-08-28